Easy One‐Pot Synthesis of 1‐Monosubstituted Aliphatic 1,2,3‐Triazoles from Aliphatic Halides,Sodium Azide and Propiolic Acid by a Click Cycloaddition/Decarboxylation Process

1‐Monosubstituted aliphatic 1,2,3‐triazoles were synthesized by a one‐pot reaction from aliphatic halides (Cl and Br), sodium azide and propiolic acid. The yields ranged from moderate to good. The reaction was easily carried out in DMF with Cs₂CO₃ at 100°C by copper‐catalyzed click cycloaddition/decarboxylation.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

Self‐assembly of Carbon Particles as a Heat Sink Coating to Promote Radiative Cooling

Novel composite carbon particles are developed that can self‐assemble as a coating on a substrate without a binder. These carbon particles were used as a coating to enhance thermal dissipation and their thermal conductivity, surface emissivity and cooling performance were measured. Carbon particles with both thiol and epoxy functional groups self‐assembled to form a coating on the surface of a heat sink without a binder, which greatly improved the thermal conductivity of the coating. Coating a heat sink with the carbon particles yielded a higher thermal conductivity and emissivity than could be obtained with the addition of binder in the conventional approach, and significantly enhanced the cooling performance. In addition, the cooling performance of the carbon nanotube outperformed all other particles when coated on a substrate, because it had the highest thermal conductivity and good radiation emissivity. We developed an equation to describe the various parameters affecting the cooling performance of the thermally dissipative coating. This equation was confirmed by the experimental data.     

Decontamination of radionuclides on construction materials

A wide variety of materials can become contaminated by radionuclides, either from a terrorist attack or an industrial or nuclear accident. The final disposition of these materials depends, in large part, on the effectiveness of decontamination measures. This study reports on investigations into the decontamination of a selection of building materials. The aim has been to find an effective, easy-to-use and inexpensive decontamination system for radionuclides of cesium and cobalt, considering both the chemical and physical nature of these potential contaminants. The basic method investigated was surface washing, due to its ease and simplicity. In the present study, a basic decontamination formulation was modified by adding isotope-specific sequestering agents, to enhance the removal of cesium(I) and cobalt(II) from such construction materials as concrete, marble, aluminum and painted steel. Spiking solutions contained ¹³⁴Cs or ⁶⁰Co, which were prepared by neutron activation in the SLOWPOKE-2 nuclear reactor facility at the Royal Military College of Canada. Gamma spectroscopy was used to determine the decontamination efficiency. The results showed that the addition of sequestering agents generally improved the radiological decontamination. Although the washing of both cesium and cobalt from non-porous materials, such as aluminum and painted steel, achieved a 90–95 % removal, the decontamination of concrete and marble was more challenging, due to the porous nature of the materials. Nevertheless, the removal efficiency from 6-year-old concrete increased from 10 % to approximately 50 % for cobalt(II), and from 18 to 55 % for cesium(I), with the use of isotope binding agents, as opposed to a simple water wash.     

Preparation of Unconventional Dendrimers that Contain Rigid NH?Triazine Linkages and Peripheral tert‐Butyl Moieties for CO2‐Selective Adsorption

Three unconventional dendrimers that contained rigid NH? triazine linkages and peripheral tert‐butyl moieties were prepared by using a convergent approach and characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Based on a thermogravimetric analysis study, these dendrimers were observed to display thermal stability at about 300 °C. The NH? triazine moiety, which possessed protonated and proton‐free nitrogen sites (like the imidazole unit), displayed the capture of polarizable CO₂ molecules through hydrogen‐bond and/or dipole–quadrupole interactions. In addition, the adsorption of various amounts of CO₂ and N₂ at different pressures suggests that the dendritic pores, which arise from the stacking of the middle co‐planar and rim protuberant dendrimers, G _n ‐N～N‐G _n (n=1–3), either swell or shrink at high pressure, thus indicating that these dendrimers may have a breathing ability.     

Facile Self‐Assembly Synthesis of PdPt Bimetallic Nanotubes with Good Performance for Ethanol Oxidation in an Alkaline Medium

PdPt bimetallic nanotubes were prepared by the self‐assembly of Pt and Pd on Te nanowires at room temperature. The morphologies of the as‐prepared PdPt nanotubes were investigated by scanning electron microscopy and transmission electron microscopy, and the results display a large amount of PdPt bimetallic nanotubes with a diameter of 10–20 nm and a length of several micrometers. The composition and structure of the nanotubes were characterized by X‐ray diffraction, high‐resolution transmission electron microscopy, scanning transmission electron microscopy, and energy spectrum analysis, and the results display uniform compositional distributions of both elements (Pd and Pt). The mechanism of the formation of the nanotube structure was supposed. The electrocatalytic performance of PdPt nanotubes were studied by cyclic voltammetry and chronoamperometry. Electrochemical results show that the as‐prepared PdPt nanotube catalysts have not only high activity but also good stability for ethanol oxidation in alkaline medium.     

Aluminum fluoride-18-labelled indocyanine green as a potential PET imaging agent for hepatic function reserve

Journal of Radioanalytical and Nuclear Chemistry - This study evaluated the potential of Al18F-labelled restrained complexing agent (RESCA)-ICG to assess hepatic function reserve on PET/CT imaging....     

过渡金属催化的1,2,3-三氮唑导向的C—H键官能团化反应研究进展

1,2,3-三氮唑化合物是一类具有重要生理活性的含氮杂环化合物, 其在医药、农药、材料科学等领域都具有广泛的应用. 不断开发基于三氮唑骨架的新型结构, 寻找新型高效的合成三氮唑衍生物的方法具有重要的意义和应用价值. 过渡金属催化的C—H键活化策略具有操作简便、效率高、三废少等优点, 是现代有机合成中高效构筑C—C键和C—X键的强大工具. 近年来, 过渡金属催化的三氮唑导向的C—H官能团化反应受到科学工作者的广泛关注, 该方法以不同结构的1,2,3-三氮唑作为导向基团, 在不同反应条件下通过直接活化C—H键来构建新的C—C键和C—X键, 高效合成复杂的三氮唑衍生物. 综述了近年来1,2,3-三氮唑导向下过渡金属催化的C—H键官能团化反应研究进展, 按照成键类型(碳-碳键、碳-杂键以及环化反应)对这些反应进行了梳理和总结, 并对今后该领域的发展进行了展望.     

Effect of Aluminum Alloy Surface Modification on Adhesion of the Modified Polyurethane Coating and Its Corrosion Protective Performance北大核心CSCD

The ordinary organic coatings on aluminum alloy usually encounter a problem of low adhesion to the substrate, which results in destruction and failure of the long-term protective performance of the anticorrosion systems. The surface modification of aluminum alloy is able to enhance the adhesion of organic coating on aluminum alloys, and to improve their protective performance. In this work, a combined surface modification of anodic oxidation and mussel adhesion protein/CeO2/3-aminopropyltriethoxysilane composite film (MCA) was developed on the aluminum alloy. The adhesion of modified polyurethane coated on the treated aluminum alloy and its corrosion protective performance were evaluated comprehensively by using contact angle, adhesion strength, electrochemical impedance spectroscopy (EIS), and scanning reference electrode technique (SRET). The measurements of EIS and SRET demonstrated that the MCA composite film on anodic oxidized Al possessed self-healing function and provided effective protection against early corrosion of aluminum alloy. The pull-off test showed that both anodic oxidation treatment and MCA composite film modification were able to increase the adhesion of modified polyurethane coating on aluminum alloy, and their combined action were supposed to remarkably enhance the adhesion strength up to 17.1 MPa. The reason for the improvement of adhesion was that the anodic oxidation treatment and MCA composite film modification could improve the surface roughness of aluminum alloy, and enhance the surface wettability and surface polarity, which is beneficent to enhance the bonding of the modified polyurethane coating to aluminum alloy surface. The EIS results showed that no any corrosion occurred for the modified polyurethane coating on the treated aluminum alloy during 65 d immersion in 3.5wt.% NaCl solution. The impedance value in low frequency range of the modified polyurethane coating always maintained at a high order of magnitude on the aluminum alloy treated by anodic oxidation and MCA composite film modification, showing an excellent protective performance of the coating system. The evaluation of Neutral Salt Spray (NSS) indicated that the modified polyurethane coating on the treated aluminum alloy owned superior corrosion protection performance, and the adhesion strength remained 13.1 MPa and no any corrosion was found at the scratch locations even after 1200 h of salt spray testing. It was concluded that combination of anodic oxidation and MCA composite film were capable of significantly improving the adhesion of modified polyurethane coating on aluminum alloy and providing long-term effective corrosion protection for aluminum alloy. © 2021 Authors. All rights reserved.     

Supramolecular Engineering Strategy to Construct BODIPY-Based White Light Emission Materials

Two kinds of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dyads BDP-OH containing 4-hydroxystyrene groups and BDP-PY bearing pyridinyl units were prepared. In addition, a naphthalene derivative NAP-PY modified by pyridinyl moieties substituent was made. The above three dyads could be used to construct white-light emission (WLE) material by a supramolecular engineering strategy due to their three primary colors of blue, green and red. The supramolecular correlations between the hydroxyl group of BDP-OH and the pyridinyl groups of NAP-PY and BDP-PY were confirmed by ¹H NMR titration, 2D NOESY and FTIR. A fluorescence monitor application was carried out based on the realization of WLE. This work might be useful for designing other WLE supramolecular systems and image display.